Power Fittings

• Galvanized U Clamp

  Galvanized u clamp is made from carbon steel with hot-dip galvanized coating. Common sets use M10 or M12 threaded rods, 4.8 grade or 8.8 grade, and pipe sizes such as 48 mm, 60 mm, 76 mm, 89 mm,...

  read more
• SS U Bolt Clamp

  SS U bolt clamp is supplied in 304 or 316 stainless steel. Common sizes include M8, M10, and M12 rods, with pipe openings from 1/2 inch and 3/4 inch to 2 inch, 2-1/2 inch, and 48 mm.

  read more
• Transformer Cross Arm

  Transformer Cross Arm is made from Q235B or Q355B channel steel with a hot-dip galvanized surface. Common platform beams use 10# channel steel 100×48×5.3 mm or 12# channel steel 120×53×5.5 mm,...

  read more
• Galvanized Transformer Cross Arm

  Galvanized Transformer Cross Arm uses Q235B or Q355B channel steel and hot-dip galvanizing. Typical sizes are 10# channel steel 100×48×5.3 mm and 12# channel steel 120×53×5.5 mm, with 2.5 m or...

  read more
• Gi Foundation Bolt

  Gi foundation bolt is made from Q235B, Q355B, 45# steel, 40Cr, or 35CrMoA according to load. Common grades include 4.6, 5.6, 8.8, and 10.9, with diameters from M16 to M48 and lengths from 200 mm...

  read more
• Mild Steel Foundation Bolt

  Mild steel foundation bolt is usually made from Q235B low carbon steel in 4.6 or 5.6 grade. Common diameters include M16, M20, M24, M30, M36, M42, and M48, with 200-2000 mm length by foundation...

  read more
• Hot DIP Galvanized Cable Support Bracket

  Hot DIP Galvanized Cable Support Bracket is made from Q235 steel with a hot-dip galvanized coating. Common arm lengths are 300 mm, 400 mm, 500 mm, and 600 mm, with 2.5-4 mm plate thickness or...

  read more
• Cross Arm Electrical Pole

  Cross arm electrical pole is made from Q235B angle steel or Q355B for heavier pole work. Common specifications include L50×5×1000 mm, L63×6×1800 mm, L75×6×1800 mm, and 2000-2500 mm heavy-duty lengths.

  read more
• Galvanized Cross Arm

  Galvanized cross arm is made from Q235B angle steel with hot-dip galvanized surface. Common sizes include L50×5×1000 mm, L63×6×1800 mm, L75×6×1800 mm, and heavy-duty L80×8 or L90×8 lengths from...

  read more
• Band Pole

  Band pole is made from Q235B, Q355B, 304 stainless steel, or 316 stainless steel. Common sizes cover pipe diameters from φ42 mm to φ400 mm, with 4-8 mm thickness and 40-80 mm band width.

  read more
• Utility Pole Band

  Utility Pole Band uses Q235B or Q355B steel with hot-dip galvanizing, or 304/316 stainless steel for corrosive areas. Common pole diameters include φ114, φ140, φ165, φ180, φ219, φ273, φ300, and...

  read more
• Pole Clamping Band

  Pole Clamping Band is made from Q235B, Q355B, 304, or 316 material with 4-8 mm thickness and 40-80 mm width. It can fit round poles from φ42 mm to φ400 mm and use 4.8 or 8.8 grade bolt sets.

  read more