Hot-Dip Galvanized Oval Eye Nuts are internally threaded utility hardware components designed to connect with specified threaded bolts or compatible fittings. The oval eye provides an attachment point for compatible shackles, guying assemblies, or other utility hardware, subject to the approved design and load requirements.
For distributors, utility contractors, electrical hardware suppliers, and OEM buyers, correct selection depends on thread compatibility, eye dimensions, material grade, mechanical requirements, and corrosion protection.
Key Selection Considerations
• Thread Compatibility: Confirm nominal diameter, pitch, thread series, tolerance, and mating bolt specifications.
• Eye Geometry: Check the inside opening, outer width, section thickness, and clearance required by the connecting hardware.
• Mechanical Requirements: Specify the required load criteria and applicable product standard. Confirm performance through relevant technical documentation.
• Corrosion Protection: Define the galvanizing specification and thread-fit requirements for the intended service environment.
Technical Specifications & Product Options
Standard configurations and drawing-based options should be confirmed against the available product range and approved technical requirements.
|
Specification |
Available or Required Details |
|
Product Type |
Oval Eye Nut |
|
Thread Size |
Metric or imperial; confirm available sizes |
|
Thread Series |
Metric, UNC, UNF, or other specified thread forms, subject to manufacturing capability |
|
Thread Tolerance |
Per approved drawing or applicable standard |
|
Eye Dimensions |
Inside opening, outer width, section thickness, overall height |
|
Material |
Specified carbon steel, alloy steel, or stainless steel, subject to availability |
|
Mechanical Requirements |
Applicable strength grade, proof load, or other specified acceptance criteria |
|
Surface Finish |
Hot-dip galvanizing or another approved finish |
|
Inspection Requirements |
Dimensional, thread, material, and coating checks as specified in the inspection plan |
|
Traceability |
Part identification and batch records, where specified |
Product Options
• Standard Configurations: For buyers sourcing established sizes and specifications, subject to confirmed availability.
• Custom Oval Eye Nuts: For projects requiring non-standard dimensions, specific thread requirements, or compatibility with existing hardware.
• OEM and Bulk Orders: Specifications, inspection requirements, packaging, and order quantities can be reviewed against project needs.
Materials, Manufacturing & Quality Control
Product conformity depends on the specified material, manufacturing process, dimensions, mechanical requirements, and inspection criteria.
Manufacturing and Inspection
Manufacturing Process: Forging, casting, or machining should be specified according to the approved product design and confirmed manufacturing capability.
Thread Inspection: Thread dimensions and fit should be verified against the applicable requirements, with allowance for coating effects where relevant.
Dimensional Inspection: Critical dimensions, including eye opening, section thickness, and threaded features, should be checked against the approved drawing.
Mechanical Verification: Required mechanical tests and acceptance criteria should be agreed upon before production.
Documentation: Material certificates, dimensional inspection reports, mechanical test reports, and coating thickness records may be requested, subject to availability and the agreed inspection plan.
Hot-Dip Galvanizing & Thread Compatibility
Corrosion protection and thread fit must be considered together when specifying galvanized oval eye nuts.
Coating Specification: Confirm the applicable galvanizing standard and its suitability for the product type and dimensions. ASTM A153/A153M or ISO 1461 may be considered where applicable; the governing specification must be confirmed for the specific component.
Thread Fit After Coating: Specify the required post-galvanizing thread fit and mating bolt requirements before production.
Coating Inspection: Define the applicable coating thickness, visual acceptance criteria, and inspection documentation in the purchase specification.
Service Environment: Select the material and finish according to the intended environment and project requirements. Suitability should not be assumed from coating type alone.
Customization & Bulk Procurement
Drawing-based specification control helps reduce dimensional mismatches and uncertainty during bulk purchasing.
Customization Options
• Thread diameter, pitch, series, and tolerance.
• Eye opening, outer dimensions, and section thickness.
• Specified material grade and mechanical acceptance criteria.
• Galvanizing requirements and post-coating thread fit.
• Product marking, batch identification, and export packaging, where available.
Information Required for RFQ
• Product Identification: Product drawing, part number, reference sample, or applicable standard.
• Technical Requirements: Thread specifications, critical dimensions, material grade, mechanical requirements, and surface finish.
• Quality Requirements: Inspection plan, testing criteria, traceability, and required certificates.
• Order Details: Quantity, target delivery date, estimated annual demand, and packaging requirements.
• Shipping Information: Destination, preferred Incoterms, and any project-specific shipping instructions.
Frequently Asked Questions
Request a Quotation
Send your drawing, product specifications, estimated order quantity, and required delivery schedule for technical review.
The quotation can then be prepared against the confirmed dimensions, material requirements, galvanizing specification, inspection scope, and packaging requirements.
Hot Tags: oval eye nut, China oval eye nut manufacturers, suppliers, factory